Tracker and Master Tracker Setup

Below are the steps to Tracker and Master Tracker Setup for the node.

The myDexChain mobile app is downloaded.

Tracker Installation Steps

A server that meets the system requirements is provided and Tracker is installed with the following steps.

  1. Server update and Docker installation codes:
  • sudo apt update;sudo apt upgrade          -> Updates the server    
  • sudo apt install docker.io                           -> Docker downloads and installs
  • sudo systemctl enable --now docker       -> Makes Docker run when the server is powered off

 

  1. Installing myDexChain container on Docker:
  • docker run -d --rm -p 2020:2020 -p 2053:3030 -v mydexchain:/var/lib/postgresql/ --privileged --log-driver=none --name mydexchain mydexchain/mydexchain:latest

 

  1. Fast SYNC download code:

In order to produce DXC and PRX, the installed Tracker must be at least 90% Sync. So production will not start until 90% of myDexChain Nodes are downloaded. In order for this process to be fast, myDexChain publishes a zip file containing the nodes at certain intervals. This file is available at backup.mydexchain.io.

To download the zip file to the Ubuntu server, a code must be generated with the final zip file.

 

  • wget -c https://backup.mydexchain.io/data-2021-09-07.tar.gz  (The name of the last zip file should be written in the part written in red.)

 

  1. Opening the zip file and Fast Sync:
  • docker kill mydexchain                                                                                   ->  Running container stops
  • rm  -rf /var/lib/docker/volumes/mydexchain/_data/12                         ->  Zip cleans the destination folder to be opened
  • tar -zxvf data-2021-09-07.tar.gz -C /var/lib/docker/volumes/mydexchain/_data/          ->  Unzip the zip to the destination folder (The name of the last zip file should be written in the part written in red). The zip opening time takes an average of 60 minutes.

 

  1. After the zip is unpacked, run the myDexChain container again on Docker:
  • docker run -d --rm -p 2020:2020 -p 2053:3030 -v mydexchain:/var/lib/postgresql/ --privileged --log-driver=none --name mydexchain mydexchain/mydexchain:latest

 

  1. Codes for linking Tracker to account after the first 5 steps are completed:
  • curl http://localhost:2020/setDextracker/DexTracker Number   ->  Identifying a DexTracker* number
  • curl http://localhost:2020/setJoinPool/Pool ApiKey                ->  Establishing a Pool** connection
  • curl http://localhost:2020/setStartDXCMiner/                                         ->  DXC mining start command
  • curl http://localhost:2020/setStartPRXMiner/                                          ->  PRX madenciliği başlatma komutu
  • curl http://localhost:2020/getTrackerKey/                                 ->  Creating TrackerKey for DXC package
  • curl http://localhost:2020/getParexKey/                                     ->  Generating ParexKey for PRX package

 

* The DexTracker number is obtained from the Mobile Application menu.

** Pool Api Keys are selected from the Master Tracker list.  https://mydexchain.io/#/dashboards/mastertracker

 

"TrackerKey" and "ParexKey" are needed in order to create DexMining and Parex Package during self-installation. In order to have these keys, Tracker installation is required.

 

You can review the myDexChain mobile application usage and production package creation steps at https://dexfactory.mydexchain.io/register.html.

Master Tracker Installation Steps

A server that meets the system requirements is provided and Tracker is installed with the following steps.

  1. Server update and Docker installation codes:
  • sudo apt update;sudo apt upgrade          -> Updates the server                  
  • sudo apt install docker.io                           -> Docker downloads and installs
  • sudo systemctl enable --now docker       -> Allows Docker to run when the server is powered off and on.

 

  1. Installing myDexChain container on Docker:
  • docker run -d --rm -p 2020:2020 -p 2053:3030 -v mydexchain:/var/lib/postgresql/ --privileged --log-driver=none --name mydexchain mydexchain/mydexchain:latest

 

  1. Fast SYNC download code:

In order to produce DXC and PRX, the installed Tracker must be at least 90% Sync. So production will not start until 90% of myDexChain Nodes are downloaded. In order for this process to be fast, myDexChain publishes a zip file containing the nodes at certain intervals. This file is available at backup.mydexchain.io.

To download the zip file to the Ubuntu server, a code must be generated with the final zip file.

 

  • wget -c https://backup.mydexchain.io/data-2021-09-07.tar.gz  (The name of the last zip file should be written in the part written in red.)

 

  1. Opening the zip file and Fast Sync:
  • docker kill mydexchain                                                                            ->  Running container stops
    • rm  -rf /var/lib/docker/volumes/mydexchain/_data/12                         ->  Zip cleans the target folder to be opened.        
    • tar -zxvf data-2021-09-07.tar.gz -C /var/lib/docker/volumes/mydexchain/_data/          ->  Unzip the zip to the destination folder (the last zip file should be written in the part written in red). The zip opening time takes an average of 60 minutes.

 

  1. After the zip is unpacked, run the myDexChain container again on Docker:
  • docker run -d --rm -p 2020:2020 -p 2053:3030 -v mydexchain:/var/lib/postgresql/ --privileged --log-driver=none --name mydexchain mydexchain/mydexchain:latest

 

  1. After completing the first 5 steps, creating and linking the Master Tracker to the account was coded:
  • curl http://localhost:2020/setDextracker/DexTracker Number        ->  Identifying a DexTracker* number
  • curl http://localhost:2020/setMasterTracker/"pool name"&"Ip Number"&"Service Fee"                    

->  It is used to create a pool. After these procedures, take note of your Pool Api Key..

  • ØPool Name : pool name of your choice.
  • ØIp numarası : Your server IP address. Master Trackers need to open 2053 port. For example: It should be written as 192.168.1.1:2053.
  • ØService Fee : min. 5% Max. 25%
  • curl http://localhost:2020/setMasterPackage/"DexHash Code

->  Activation with the Master Package. (For the pool to be active, Master Packege must be created for 1,000,000 (one million) DXC from the myDexChain application. The DexHash code of the resulting package must be defined to the Pool Tracker.) No extra income can be obtained with 1,000,000 DXC. It can only be used for Pool activity.

  • curl http://localhost:2020/setStartDXCMiner/                                         ->  DXC Mining start command
  • curl http://localhost:2020/setStartPRXMiner/                                          ->  PRX Mining start command
  • curl http://localhost:2020/getTrackerKey/                                 ->  Creating TrackerKey for DXC package
  • curl http://localhost:2020/getParexKey/                                     ->  Creating TrackerKey for PRX package
Türkiye Topluluğu İçin Bilgi
Alt for image
Dex Factory

Dex Tracker
Getting Started | Mobile App
Earning Algorithm
Semiotic Blockchain
Parex